R&S®TSM-DVB DVB-T/H Diversity Test Receiver

Flexible solution for fast mobile DVB-T/H coverage measurements

General Information

The R&S®TSM-DVB DVB-T/H diversity test receiver has been designed for mobile coverage measurements in DVB-T/H networks, even at very high driving speeds (>100 km/h). Its design ensures reliable and fast measurements after quick and easy setup.

R&S®ROMES4 is used to control and set up the R&S®TSM-DVB and to capture and display the measurement data.

The R&S®TSM-DVB DVB-T/H diversity test receiver provides the following measurement parameters:

  • RF level
  • MER (modulation error ratio)
  • PER (packet error rate, MPEG packets per second)
  • BER (bit error ratio after Reed-Solomon)
  • TPS bits b16 to b55
  • DVB-H signaling preformed/not preformed
  • Time-slicing is used/not used on HP/LP stream
  • MPE-FEC is used/not used on HP/LP stream
  • Constellation diagram view
  • C/(N+i)
  • Several status indicators (AGC locked, carrier locked, MPEG sync locked, etc)
  • Transport signal information (DVB-T mode, code rate, etc.)